• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out over time and need to be replaced. It is important to match the dimensions of the handles you have previously replaced when replacing them.

The top screw's position the lever, and the keyhole dimensions are the three measurements you need to determine. Refer to the size guide for help with this.

Inline Lever/Lever

A lever handle is a modern door handle that is designed to fit new or replacement doors. This style of handle is available in a variety of styles and finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed of tough materials and are perfect for doors with multiple points that require a strong design. The handles are inline and operate with the same spindle as well as screw fixings, so they can be easily incorporated into existing or new uPVC/Composite doors.

The handle can be positioned and angled to suit all users. The handle has been tested for endurance up to 200,000 cycles. This helps ensure that the finish is of high quality and performance will last for a long time. The sprung lever is adjustable to accommodate a wide range of locks. This is particularly beneficial for narrower door frames in which the cylinder is further back. A lever that is shorter is an excellent option for doors where the latch can be activated by the thumb turn inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles that are found on most doors. These handles can operate from a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are typically utilized on UPVC doors with double glazing door handles glazing and come in a range of finishes & variations.

The handles have been tested to the minimum of 200k cycles and are available in various finishes like White Silver, Chrome, & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This provides the handle with an outstanding performance and durability for its intended use.

All of the UPVC lever pad designs are supplied with screws and a spindle, allowing them to be fitted on any new or existing uPVC door. The backplate fixation centers of 211mm allow for a wider handle, which is often a benefit when replacing a damaged or old multi-point door lock mechanism. These handle levers have a spring, which solves the problem of handles for doors (Click That Link) that slide out of horizontal position when not being used.

When selecting a replacement UPVC handle and spindle, it is essential to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is also referred to as 'handle centres or cylinder centres'. It is important for matching the correct handles.

After you have identified the correct PZ size and the correct PZ size, you must ensure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. These are typically a square or round shape with an internal lever as well as an external push pad.

The majority of upvc handle window lever pads that we sell are sprung, meaning that they will return to their horizontal position when they are not being used, instead of hanging out and possibly sticking in the frame. This stops draughts and cold air from getting into a house. The majority of UPVC lever pad handles are available in left and right handed versions which allows them to be put on either side of doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They work with a key to unlock a cylinder that is then revealed with pins that can be aligned with the pins in the lock body, allowing them to turn the cam, thereby opening the door. Euro cylinders can be fitted with up to six pins with both internal and external doors typically requiring different levels of security.

The choice of the correct cylinder is essential; it is contingent on how your doors and handles for upvc windows are used. External doors, for instance, should be fitted with higher security cylinders, whereas internal doors can be secured using a standard cylinder. Additionally, certain cylinders come with additional features which can enhance security even more, like anti-drill or anti-bump features.

To ensure that the euro cylinder is the correct size for your bifold door handle replacement, it must be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the end of the cylinder and the thumb turn if you have one. It is recommended to do this while the lock is in place however in the event that this is not feasible, you can take it off and take it off to measure. It is essential to avoid having a cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. They are designed to decrease attacks by forcing cylinders to rotate in a new direction. This helps stop the attack and keep your doors safe.

There are also cylinders made to resist snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock and then the front of the cylinder is snapped off. This is a faster and more convenient method of gaining access than using a multipoint locking system. It also leaves no evidence of the break-in which could hinder insurance claims.

Spring Cassette

This spring cassette is located inside the base plate of the door handle. It provides a sprung solution to help return your multipoint lock handles back to their resting position after using. The handles had no spring and would droop when the locking mechanism was removed. Adding this simple component is among the best methods to correct this and it is also an excellent way to stop your upvc doors from getting stuck in either closed or open position, as these are not always easy to manually close by hand.

These spring cassettes have been specifically designed to be used with multipoint locks that are sprung, they will not fit non-sprung multipoint handles. You will require a custom hole cut into your backplate to allow these to fit (please see image for technical diagram). They are a replacement for existing damaged or missing cassettes inside the backplate of the door handle for numerous brands of uPVC doors. They are sold as one unit. They come with a square cut out that can accommodate an 8mm shaft.

These spring cassettes are a great cost-effective solution to the issue of your door handles that are sagging. They are simple to put in and will extend the life span of your uPVC doors. Contact us for more information about our wide range of uPVC accessories and spares. We are always happy to offer expert advice and to assist you.