• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. However when you have double glazed window repairs near me pane windows that are anchored by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window repair panes, so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is significant, you may prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window repair near me handle yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows can not only cause degradation of your home's structure but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window repairs near me.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A Upvc Window Repair specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens in an ease. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process, but it's easier to do when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also essential to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges may also become misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes filled with some type of filler. They can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a life span and they may reach a point where it is more efficient to replace them than repair them. If you encounter any issues with your upvc window you should consult an expert as soon as you can.