• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double glaze window repair-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers that will help the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

Once the glass repairs has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and double glaze repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you might think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and do a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common cause for leaks in upvc doors repair windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazing window repair-glazed glass it is more likely the issue is more with the seal rather than the frame. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is essentially a simple process but it can be simpler when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, which can cause a gap between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.