• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors get worn out over time and will need to be replaced. It is crucial to match the dimensions of the handles you have previously replaced when replacing a window handle them.

The three measurements to be inspected are the top screw's position as well as the key hole and lever dimensions. Refer to the size guide for assistance in this.

Inline Lever/Lever

A lever or lever door handle is a modern handle that can be installed on new or replacement doors. This style of handle is available in various styles and finishes. A variety of manufacturers provide this handle including Avocet, ERA, Fullex, Hoppe, mila door handles, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed of tough materials and are perfect for doors with multiple points that require a robust design. The handles are inline, and use the same spindle and screws to secure them. They are easily fitted on a new or existing uPVC/Composite doors.

The handle can be positioned and angled to fit any user. The handle has been tested to 200,000 cycles, this will ensure the quality of the finish and the performance of the handle over time. The lever that springs is adjustable to accommodate a wide range of locks. This is particularly useful in doors with smaller door frames where the cylinder is located further back. A shortened lever can also be used on doors with latches that can be opened by the thumb located on the inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles used on the majority of doors. The handle can operate from a single spindle (inline) or independently from both sides using two offset spindles or inline (pad). They are generally employed on UPVC double-glazed doors and come in a variety of styles and finishes.

The handles for Double glazed Doors are available in a variety of finishes including White, Chrome and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle an outstanding performance and long-lasting durability for its intended purpose.

All of the UPVC lever pad designs are supplied with the spindle and screws that allow them to be put on any new or existing upvc door handles door. The backplate fixation centers of 211mm allow for a bigger handle, which is often beneficial when replacing an old or damaged multi-point door lock mechanism. The handle levers are spring-loaded, thereby solving the issue of handles hanging out of their horizontal position when they are not being used.

When selecting the replacement UPVC handle and spindle, it is crucial to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is also known as the 'handle centre' or 'cylinder centres' and is a critical aspect in ensuring that you have the correct handles.

After you have identified the correct size of PZ, you will need to ensure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles you require for your door. These are typically round or square with an internal lever, and an external push pad.

The majority of UPVC lever pads that we sell are sprung, meaning that they return to their horizontal position when they are not being used, instead of hanging out and possibly sticking in the frame. This stops draughts from entering the property. It is also the case that the majority of UPVC lever pad handles are hand-operated which allows you to place them on either side of the door.

Euro Cylinder

Cylinder locks are typically used on uPVC doors, but they can also be found on other types of doors. The cylinder lock operates by using a key that unlocks the cylinder case. This exposes pins that can be aligned with the pins in the lock, allowing them to rotate the revolving camera, thereby opening the door. Euro cylinders can be fitted with up to six pins. External and internal doors require different levels of security.

Selecting the right cylinder for your needs is crucial; it depends on the way your door and handle are used. External doors, for example, should be fitted with cylinders with greater security, whereas doors inside can be secured using the standard cylinder. Some cylinders have extra features that increase security, such as anti-drill or anti-bump properties.

A euro cylinder needs to be measured accurately to ensure that it is the right size for your door. The cylinder should be measured from the central fixing screw hole to each end of the cylinder and the thumb turn if you have one. If you cannot measure using the lock in a fixed position, you can remove it. A cylinder that extends beyond the handle and escutcheon could be susceptible to attacks like snapping locks, therefore it is crucial that it's not too long.

Most newer cylinders have been designed with bump and anti-drill features included in their design. They are designed to decrease the chance of a attack by forcing the cylinder rotate in a different direction. This will help to deflect attacks and protect your door.

There are also cylinders designed to withstand snapping. This is an increasingly common kind of attack on cylinders where the break line in the lock is attacked by a tool that is specially designed to break the front of the cylinder and allow the door to open. This is a lot faster and more straightforward than gaining access through multipoint locks. It also leaves no evidence of a break-in which can hinder an insurance claim.

Spring Cassette

This spring cassette sits in the base of your door handle's backplate, providing a spring solution and returning the multipoint lock handles back to their original position after usage. In the past, a lot of handles didn't have a spring built into them and without this they can droop or 'drop' once the locking mechanism has been disengaged. This simple component is the best solution to address this issue. It also stops your upvc door from becoming stuck in either the closed or open position as they are difficult to close manually.

These spring cassettes were created to be used with a spring multipoint locks. They are not compatible with handles that are not sprung and you'll have to cut a hole in your backplate in order for them to fit. (Please look at the image for a more detailed diagram). They are a replacement for existing broken or missing cassettes within the backplate of the door handle for various kinds of uPVC doors. They are fitted with a square cut-out that allows for an 8mm spindle to be used and are sold as a set.

These spring cassettes are a fantastic value-for-money way to fix the problem of your door handles sagging. They are simple to put in and will extend the life span of your uPVC doors. For more information about our range of uPVC accessories and spares, you can get in touch with our team. We are always available to provide expert advice and to assist you.