• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a lost subaru car Keys Key Fob at Home

It is possible that you need the key fob to be programmed by an auto locksmith or subaru chip key replacement dealer, depending on the age of your Subaru is. This is done by connecting a computer machine to your vehicle.

To program your subaru outback key replacement, start by unlocking the driver's door with the door button control, and then shut it. You will hear a chime in the instrument panel, and the dome lights will flash.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you must know which kind of key fob you have. This can be accomplished by looking at the design of the key fob or by listening to the chime in your car.

Once you've got the information then you can begin the process of programming your keyfob from home. You will need an aluminum flathead and a key for this. The key fob case can be opened by twisting it. Then push the key in and pull the battery from the tiny tabs that hold it in place. Replace the battery with a fresh one and put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

The battery should be replaced. This is a smart idea as it could revive key fobs which aren't working anymore. In some instances, the buttons on the key fob could be damaged. If you see that the metal contacts of the button have come loose Try soldering them into their place in order to get them back to function again.

Make sure you turn off your ignition and close your doors before you begin. You can do this by closing the driver's side door and pressing your door button ten times in quick sequence. Then, you should hear the instrument panel chime, and your dome lights should flash. This indicates that you're ready to move on.

Step 3. Insert the fob of your key into the ignition

A lot of articles on the internet will teach you how to program your new or replacement key subaru Subaru keyfob at home. But, the majority of them do not provide specific instructions. Reprogramming an electronic lock is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and the doors shut. Use the door button to unlock all doors. Open and close the driver’s door a second time. Inject and remove the ignition key (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4: Turn the Ignition On

Before you begin this process of key fob programming, it is important to remember that this procedure only works in the event that you already have a functioning key already. If you do not, then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once the key has been programmed, it will be in a position to start your vehicle within about five minutes. Start by closing all doors and shutting off the engine. Then, sit in your driver's chair and unlock all doors with the door button control. Place the key into the ignition and turn it off to the off position (the electrical systems will turn on, but the engine will remain off), and then back to the off position ten times in quick succession.

Step 5 Step 5: Unlock Driver's Door

Subaru provides a variety of premium automobiles equipped with key fobs that lock and unlock doors, start the engine, and defrost windows. These devices can stop functioning.

Call a locksmith dealer to solve the issue. This will fix the issue and ensure that your vehicle is safe.

First, open and close the door to the driver's side. Put the key in the ignition and turn it to position 1. Then, return it to the off position. Repeat this 10 times in an order as fast as you can. After the tenth rep, you should hear a chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The process to replace a battery in the Subaru remote key fob is easy. First, you must open the exterior fob casing. Then, use the flathead screwdriver open the internal case and take out the old battery.

After taking out the old battery, replace it with the new one and close the case. Sit in the driver's seat and open all doors using the door button control. Then, put the key in the ignition and turn it so that the electrical systems are powered on but the engine is off. Repeat this 10 times in a row until you hear the chime coming from the instrument panel. This puts the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The annoying chirp that can be heard when you lock or unlock the Subaru Key Fob from the outside of the vehicle is distracting for some owners. In certain instances you can turn off the chirp by opening and closing all doors by double-clicking on the lock button on the key fob.

Switch off the ignition and close all doors, as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. After that, the instrument panel emits an audible chime. The chime signals that the fuel-filler lid and door lid are locked. It is possible to alter the setting so that the doors lock automatically without pressing a button.

Step 8: Enter the 8-Digit Transmitter Number.

Keep the first 8 digits of the code in your mind. Now, sit in your driver's seat, close all doors and then turn the key to the first position (towards on). After 10 turns, your instrument panel will sound once.

The circuit board that controls the transmitter is inside the key fob case. There will be one or two sets of numbers (8-digits) on the circuit board. Note the first number sequence, and follow the directions in this guide to register the code in the system of your vehicle. This procedure may require a visit to the dealer for older models.