• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

You can find the perfect handle for your door, whether you are replacing your handles or adding additional security. The Upvc handles are simple to install and meet the 92mm minimum central distance for multipoint locks.

The most important measurements to consider are the backplate fixing centers and lever/key hole dimensions. Compare these measurements with your existing measurements prior to making a purchase.

Lever/Pad

Lever pad door handles are made up of the lever handle on one side and a paddle-shaped handle on the other. These are designed to be used with key wind locks, although they can also be fitted to split spindle multipoint door locks (though you will need a separate dual spindle lock case).

Our range of upvc handles lever pads are available in a variety of finishes and these will be listed in the drop down list after you have selected the perfect handle for your doors. Not all styles of handle are available in every finish though and it is recommended to check the technical drawings and sizes sections for the specific product that you are looking to ensure that you are getting the right size and fit.

It is important that when selecting the new set of upvc lever pad handles, they match the PZ (distance from the spindle of the handle to the centre of the hole of the cylinder) of your multipoint door locks. This is because they are required to be aligned so that the doors remain locked, no matter if you're looking from the inside or from the outside. Our handles are designed to fit the majority of standard cylinders, but it is important to double-check prior to purchasing.

If you are looking to upgrade to dual spindle levers you'll need to remove the existing handles and disassemble the lock case. This will require an extra split cylinder inline. You can purchase these separately. We have included a technical diagram in the images of each product.

Once you have removed the screws that hold your existing door handle it is recommended to loosen them and examine the mechanism to see what condition it is in. You may need to loosen the screws even more when they aren't tight. Then you can take off the old spindle and handle and replace it with a new upvc door handle repair door handle. Before putting the handle in position, it is recommended to make sure it is in the correct position, and you can do this by inserting your finger in the gap between the door frame and the handle to ensure that it is in a level position.

Lever/Lever

Lever door handles operate an a multi-point lock using an Euro Cylinder and are found on the majority of upvc double doors, aluminium doors and a few wooden doors. They are available in two forms, having the lever inside and a paddle on the outside. Sprung - these include a spring cassette within the backplate that helps bring the handle lever to a horizontal position. Non-sprung: These do NOT include a mechanism that can spring the handle lever to a horizontal angle.

To fix the door handle lever that is sliding it is necessary to locate the hole or pin that is the detent access point. It's typically small, protruding ring or rectangular located on the handle base plate. Once located you can loosen the set screw using the help of a screwdriver, and then take it off to allow the lever, allowing it to return to the horizontal position.

After the handle is placed horizontally, you can reinstall the screws. Make sure to tighten them so that the handle remains firmly connected to the base plate. It is also recommended to apply a threadlocking adhesive to the screw threads to increase the grip and prevent them from becoming loose over time.

Drooping lever door handles could be the result of various causes. The most common reason is that the fixings are too tight and the lever bearing to get tangled up against the door handles repair near me. It is also possible that the levers have not been operated at a right angle, which compresses the latch mechanism and stops it from fully springing into operation.

Another reason is that the sprung lever isn't working properly. This is typically due to the spring not being in the proper position within the backplate. To check if the handle returns to horizontal, simply move it.

If your door handles are loose, it is important to identify the issue fast, as it could cause excessive wear on the screws and possibly to the handle falling off of the base plate. It is recommended to tighten all loose screws on a regular basis in order to prevent them from loosening.

Lever/Snib

These upvc handles are called 'Snib handle sets' and have a snib lock button at the top of the door lever. If you do not have a dummy locking device, you can use this to lock the door. These handles come with a Fullex lock 68PZ. (68mm between the spindle and the lock centre). We also carry a selection of other Door Handle Repair Plate handles with 68PZ from manufacturers such as Ferco and Fab & Fix.

You can update your home by changing the door handles, whether you are replacing the handles on your existing ones or installing new ones on doors you've built. There are a variety of door handles made of upvc that include traditional levers on backplate, straight or curving short latches and dummy knob handles for multi-point locks, which are perfect for French doors.

Rose door handles are circular or oval-shaped versions of lever on backplate handles. These types of door handles come with the knob or lever on a backplate, which sits behind the knob or lever and is sometimes called a rosette. However, certain back plates can be removed to allow for concealed fixing.

There's a wide selection of chrome and coloured finishes available for these handles that match your door and other hardware, including hinges, knobs, bolts and so on. Some handles have a grub screw to attach the lever or knob firmly to the spindle. Some handles come with bathroom spindles that can be used to make bathroom locks. They also have a thumbturn release mechanism, and can be used on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the problem will most likely be with the tubular latch. There could be a variety of reasons for this, one of which is an unlubricated latch plate on the latch plate. This can be fixed quite easily by opening the door and spraying lubricant over the handle and lock. It could also be that the latch plate is separated from the backplate. This is a more complex issue that requires a professional.

A multipoint handle system is the best solution for stuck door handles. These handles are attached to the faceplate, and are operated with the use of a key or thumb turn knob which activates the cam that locks the deadbolt. The handles are available in a range of sizes to suit various kinds of uPVC doors. They also come with a variety of attractive finishes that complement the existing hardware. These handles are available on the internet or through a local locksmith. They are easy to install and come with clear instructions.

To choose a replacement handle set, you will be required to know the PZ size of your cylinder. This is the distance from the edge of the frame of the door to the central edge of the hole in the handle in millimetres. You should also know if your door handles repair near me has a hook style lock or a mortise lock. The most effective way to locate the correct handles once you know the measurements is to use the brand filter on the website. This will narrow down the options and you can then choose the appropriate size from the list.

A typical handle set includes an arm comprising two screws of different lengths, drill guides and instructions for installation. Smarter versions, such as the Igloohome Smart Mortise 2+ come with a mortice lock with a keypad. These are more complicated units and are best suited for professional installers or very adept DIYers. Certain handle sets come with various additional accessories, such as weather strips, which can be used to improve the appearance of the door.