• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet move around whenever they want without you needing to let them in or out. They also prevent your cat from peeing in the house.

Installing a cat flap on a upvc door panel is much simpler than installing one in a glass door, however it requires some knowledge and the proper tools.

Measure the Door

The installation of a cat flap inside a door can be tricky but if you use the correct type of cat flap make sure you take your time and follow the instructions provided it should not prove to be too difficult. We will be showing you how much to install a cat flap to draw the shape, use the jigsaw to slice the area in the door and then finish the job by securing the flap to the door. This will ensure that the flap stays in place and protects the door from rain and wind causing damage.

The first thing to do is determine the width of your pet to get an accurate measurement of the size of cat flap you will require. This will let you select a flap that is large enough to allow your pet to enter the house and leave without needing to open the door each time.

Once you have the measurements, you can determine the location on the door where the template should be placed. typically this is done using an X, but some kits come with drawings that show the location to drill, if you have one, then attach it to the door and use a pencil to draw around it. If your door has sill or moulding on the bottom of it ensure that you have enough space because this will ensure your cat flap installers's safety and will prevent them from getting access to your home.

Set a square to make sure you're cutting correctly and to ensure the hole is a perfect rectangle shape. When you are satisfied with the result, you can begin removing the remaining door material. Set the square with a ruler to ensure you are cutting the material correctly and that the hole is a rectangle. Once you are satisfied with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and outside without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature inside your home stable. fitting cat Flap in upvc door panel (Sheridan-mollerup.technetbloggers.de) a cat flap to your door can be a daunting task to those who haven't done it before. Many people call an expert carpenter or joiner to do the work. This is an option but you can do it yourself, provided the tools are in order and the steps are adhered to.

While this is much easier to do with a timber door, it is still possible to do this in uPVC doors, though you need to be very careful not to scratch the doors, as this can invalidate your warranty. First, you must measure the door to make sure it will accommodate the new cat-flap. This should be easy enough if you are using a standard uPVC door, however you may need to take more care if using an insulated or composite type of door as these can be more difficult to cut into than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the height from the floor to the lower part of the cat's stomach, and you'll need find a spot near the door where this measurement is within the range that your pet can comfortably go through. Once you have this information then you be required to mark the area using an eraser and a spirit level to ensure that the hole you will create will fit your cat.

After you have marked the area, it is time to cut out the hole. You will need to use an jigsaw. It is crucial to take your time in order to ensure that the cuts are smooth and straight rather than rough and uneven, as this could damage your door. You should also remember to wear safety glasses and a dust protection mask when using the jigsaw, as inhaling the sawdust can be dangerous to your health. After you've cut the hole, you will require sandpaper to smooth the edges so that the cat flap is easily inserted into the hole.

Cut a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be difficult. It is tempting to tackle the task yourself, but unless you have expertise in DIY, it's probably best to get a professional to do the task for you. A mistake could not only look ugly and unattractive, but could also be a security threat. It could allow cold air to enter when the cat is outside and hot air to escape when inside.

Mark the hole's position on the door with an eraser and a spirit level. This will ensure that it is properly positioned and aligns with the rest of the door. Make sure to have sandpaper on hand to smooth out any rough edges.

Once the line has been marked you should cut out the hole with a jigsaw, remember to wear any necessary safety equipment for working with a power tool. If you're worried about noise, you can buy a jigsaw with a cord that is quieter and more user-friendly.

You should only remove the material needed to create the flap. A little bit of extra material is required to increase the thickness of the the flap but removing more than that can cause problems or harm the frame of the door.

A door made of upvc may have a metal frame or a panel inside which could block the microchip cat flap if this is the case, you'll need to cut an oversize hole to ensure the metal doesn't get in contact with the the cat flap. If this is the case, it is crucial to fill in the oversize gap and seal it with water.

If you're planning to install an animal flap to the frame of a double-glazed window with cat flap with a frame made of metal, you'll need to speak to a professional who can supply you with a new pane of glass with the hole for the cat flap in it. It will be much cheaper to get this done rather than trying to fix the cat flap onto an existing glass pane that hasn't been designed specifically for the purpose.

Install the Flap

Cat flaps give your pet the freedom to go and come anytime they want, allowing them to relax in the house when they'd like. However, if you have a uPVC door it can be difficult to install an animal flap, especially when you don't have glass panes that could be cut to fit one. Luckily, if you're happy to buy and install a half-glazed replacement uPVC panel, it's possible to add a cat flap to these doors. It's not a simple matter of slicing an opening in the door. You'll also need to take a few steps to ensure it's safe.

A composite, uPVC, or GRP door panel is typically made up of a plastic skin that is bonded to an insulating polystyrene core. The material is extremely fragile and care should be taken when cutting through it to avoid causing damage. This kind of door typically has a template which you can use as a guide to cut the hole into the door.

Once you've marked the opening in your front door, it is time to install the cat flap. You can purchase and install various models including basic button operated ones to microchip-activated ones that allow only your pet. Whatever kind of cat flap you pick, it's vital that your cat is able to use the flap without getting caught in the rain.

A circular fitting is superior than a square one, as circles can be cut more securely into glass. This is because square holes are more likely to break the glass when drilled. This is also a safer choice because you won't need to drill into the toughened glass, which could break and hurt your pet or family members. This is particularly important if you have a child or an elderly person living in your home who may be injured by shards glass.