• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back at their own pace, without having to let them in or out. They also prevent your cat from peeing in the house.

Installing a cat flap into a upvc door panel is a lot easier than a glass door, however it does require some skills and the appropriate tools.

Take a measurement of the door

The installation of a cat flap in the front door is difficult however, so long as the cat flap is of the appropriate one and you follow the directions, it shouldn't be too difficult. We will be showing you how to draw the shape, then use a jigsaw to cut out the door's opening and then finish the job by fixing the cat flap to the door. This will ensure that the flap stays in position and protects the doors from the damage caused by wind and rain.

The first thing you need to do is take a measurement of the width of your pet to determine an accurate estimate of what size of cat flap you'll require. This will ensure that the flap is big enough to allow your pet to enter and leave the house without having to open or close the door each time, but also small enough to keep them from going too far in either direction.

Once you have the measurements you can determine where on the door the template should be positioned, typically this is done using an X, however some kits include a drawing that shows where to drill. If you have one, then attach it to the door and draw a line around the door. If your door has a sill or moulding on the bottom of it ensure you have clearance from these to keep your cat safe and prevent them gaining access to your home.

Put on your eye protection and a dust mask and using a jigsaw start to cut along the line you penciled in, don't try to press the blade too hard because this could cause it to cut more quickly than you want it to. Set the square with a ruler to ensure that you're cutting the material in a proper manner and that the hole is a rectangle. When you are happy with the result, you can take the door material off.

Draw a Line

The cat flap allows you to let your pet inside and outside without worrying about unwanted visitors or unwanted gifts. It also stops draughts and helps to keep your home's temperature stable. Installing a cat flap on your door may seem daunting to those who haven't tried it before. A lot of people will hire a professional carpenter or joiner to complete the job. While this is definitely an option, it is possible to do the job yourself if you have the right tools and follow the instructions with care.

While this is much easier to do with a wooden door, it is still possible to do this in uPVC doors - although you need to be very careful not to scratch the doors as this will cause damage to the warranty. First, Fitting Cat Flap In Upvc Door Panel you need to take measurements of the door to ensure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However when your door is composite or a different type of door, you might have to be more cautious.

The next step is to determine the height of your belly for your cat. This is the amount of height between the floor and the underside of your cat's stomach. It is important to find an area at the entrance that will allow your pet to move through wall cat flap easily. Once you've got the information, you'll be required to mark the space using a spirit level and a pencil, so that you are certain that the hole will be suitable for your cat.

Once you've marked the area, it's time to make the hole. You will need an jigsaw. It is essential to be patient to ensure that the cuts are smooth and clean instead of rough and uneven, as this could damage your door. It is also important to wear safety glasses and a dust mask when working with the jigsaw as dust from the saw can be dangerous to your health. Once you have completed the cutting, you'll have to smooth out the edges of the hole with sandpaper, so that the cat flap can be fitted easily into place.

Make a hole

It isn't easy to put an animal flap on a door panel or sealed double glazing unit. It is tempting to tackle the task yourself, but unless have experience in DIY it is recommended to hire an expert to complete the task for you. A botched job could not only be ugly, but also pose an security risk. It could let cold air to enter when the cat is outside and hot air out when the cat is inside.

The first thing you have to do is mark out the position of the hole in the door using pencil and a spirit level. This will ensure that it is correctly located and is flush with all the other parts of the door. Make sure you have sandpaper on hand to smooth out any rough edges.

Wear any safety gear you require when working with a power tool. If you're worried about the noise, you can buy a jigsaw with a cord that is more quiet and easy to use.

It is best to only remove the material needed to fit the cat flap. A little bit of extra material will be needed to cover the thickness of the the flap, but removing more than that can cause problems and even damage the doors frame.

A door made of upvc could include a metal frame, or a panel inside that could interfere with the microchip cat flap and in this case you'll need to cut an over-sized hole to ensure that the metal does not get in contact with the wall of the cat flap, if this is done, it is essential to fill in the gap and render it watertight.

If you're planning to install the cat flap onto a upvc door or double glazed window with a metal frame then you'll need to talk to a professional who can provide you with a brand new pane of glass that already has the hole for the cat flap already drilled inside. It will be much cheaper to do this than trying to fix the cat flap onto an existing pane of glass that was not designed specifically for this purpose.

Fit the Flap

Cat flaps allow your pet the freedom to move around whenever they like and let them relax at home whenever they like. If you have a uPVC front door, it may be difficult to install the cat flap. This is particularly true when you don't have a glass panel that is cut. If you're willing to install a half-glazed uPVC replacement panel, it's possible to install an additional cat flap. It's not a matter of cutting holes in the door. You'll also have to take a few steps to ensure that it is secure.

A composite door cat flap door panel usually has an flimsy plastic outer layer joined to a soft polystyrene insulating core. It is crucial to be careful when cutting the material. This type door comes with a template that can be used to cut the hole.

Once you have marked the location of the hole in your door, it's time to install the flap itself. You can buy and fit many different models including basic button operated ones to microchip-activated ones that allow access only to your pet. However, no matter what kind of cat flap double glazing flap you choose it's crucial to ensure that your cat can use the flap without becoming trapped in the weather.

It's a good idea to choose a circular fitting cat Flap in upvc door panel rather than a square one, as circles are more securely cut into the door glass. It's because square holes are more likely to break the glass when they are drilled. It's also a much safer option to use as you don't risk having to drill into toughened glass that might break and injure your pet or family members. This is particularly crucial if you have children or elderly people in your home that could be hurt by glass fragments.