• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. However If you have double glazed window repairs pane windows that are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you might be interested in the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

upvc window repairs handles can also become loose. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, upvc window repair window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease it could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's simpler when you have a person to help hold the frame in place.

It is also important to ensure that the upvc window repair near me hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash meets the frame. They can be repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, sash and again it may be feasible to give them a clean but in some cases it might be necessary to have them replaced.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.