• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

door handle lock repair (Mozillabd.science) handles are a key part of the decor of your home. A new handle can bring your home's decor and interior up-to-date.

Over time, your doors' knobs can start to feel stiff, or break. These are indications that it's time to replace the knobs. This guide will help you choose the appropriate replacement door handle for your home.

door handle repairs near me Knobs

The handles on your doors will improve the look of your home and allow you to shut and open them. They come in a wide range of colors, finishes and styles that will complement your decor. If yours is beginning to show signs of wear or just need an upgrade, replacing them is relatively simple and can be done in a couple of steps.

You must locate the spindle, door handle lock repair or shaft, through which the knob is inserted to the front door handle repair. Some knobs have a small opening that you can access with a screwdriver for removal of the set screws that keep the handle in place. Some have a small slot or hole in which can be used with a flathead screwdriver to push on a spring-activated pin, also known as a detent. The pin opens the latch mechanism and lets you to pull or push the knob.

Once you have the spindle or shaft in your hand, remove the old knob and replace it. Make sure to align it properly and check to ensure that the latch works properly before tightening your new set screws.

Once you've replaced the knob, put the rod of the latch over the hole in the door and interlock it with the rod mechanism on the second knob. Make sure that the holes are lined up, then thread in the latch plate screws and tighten them.

Some people opt for the smooth or brushed finish on their door hardware to give it modern, sleek design that complements other furniture in their homes. Some prefer a rustic style that works well with farmhouse-style rooms. If you have someone in your family who has mobility issues, you might prefer the lever or rim lock, which requires less pressure to operate.

Other factors are being looked at more and more when it comes to the design of door handles. Infection control and accessibility have been major considerations in the creation of new designs for handles. For instance certain handles can be operated with an arm.

Latch

The latch that holds your door handle open will wear out due to age and use. Switching out the old latch to fit a new handle can be an easy DIY project and it will make a significant difference in how your door opens and closes.

Depending on the type of handle you use the latch may be a separate part or a part of the knob. In either case, you'll need to follow the same procedure to remove and replace. Removing the old latch of the way is relatively simple especially if the door handle has what is known as a "magic button". This little pressure-slot, located on the side knob, is the one you'll need to press in order to remove the latch of the handle.

If your handle does not have this magic button you will need to remove the cover plates that are placed over the latch plate. They are typically circular or rectangular and can be removed using a screwdriver to pull them off of the handle. Some have a tiny slot inside that you can slide your screwdriver into, while others snap off.

Then, unscrew the machine screws that hold the inner plate and latch to the door handle. These are the screws with a sharp tip and you'll be required to keep them in a safe place to reuse them in subsequent steps. Once these are off, you can take the latch plate and mechanism out of the door's hole and place it in a safe place.

Now you can start on the new latch. Install the latch plate into the door hole and secure it with the hardware supplied. Make sure that the square pin in the interior of the latch is facing the latching mechanism of the handle and is aligned with the screw holes on the other sides of the handle. Then fix the exterior latch plate with the provided screws.

Strike Plate

It is common to replace a door handle when it is loose or isn't locking properly. This is usually due to incorrectly aligned parts in the latching mechanism, for example the strike plate being too small or has moved up or down on the doorjamb over time. This easy project allows you to replace your old strike plate with a longer, new one that will give you better security and ensure that your front door handle repair stays shut.

Apply a lipstick or another marking material on the latch bolt to determine if it's the strike plate. Close the door and try to latch it. If the mark is below the strike plate's hole, it indicates that the plate is too small and the door will not latch. If the mark is above the strike plate hole, it's most likely that the strike plate has been moved up or down the doorjamb.

It is possible to install the new strikeplate in place over the one you have already installed using the screws included with it, depending on your door. However, you may need to drill holes first, and door handle lock repair then chisel out some of the wood to ensure it's a snug fit. If this is the case make sure you don't be too rough with the chiseling process or you'll damage the integrity of the doorjamb.

You could also try installing a new box strike plate, which gives the lock a much more secure grip on the door and requires more force to open it. It usually requires two larger screws to fix the strike plate into the frame of the door. To do this, you'll have to take off the existing strike plate and then drill and chisel away the wood to make space for the new one.

This strike plate is specifically designed to work with rim locks from the past, and it's made from robust solid brass with the heavy duty thickness. It comes with both wood screws and machine screws, so you'll have the correct hardware for the job. Be aware that the wood screws have a sharp tip, while the machine ones are more blunt.