• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back as they please without you having to let them in or out. They can also help prevent your cat from urinating inside the home.

Installing a cat flap on a upvc door panel is a lot easier than glass doors, however it does require some skills and [Redirect Only] the right tools.

Measure the Door

Fitting a cat door in the front door is difficult however, as long as the cat flap is the correct one and you follow the guidelines, it shouldn't be too difficult. We will show you how to mark out the shape, then use the jigsaw to slice the area in the door and then finish off the job by securing the flap to the door. This will ensure that the flap stays in position and protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap that you require, measure the width of your pet. This will ensure that the flap is large enough to allow your pet to leave and enter the home without having to open or close the door each time, but also small enough to keep the pet from straying too far either way.

If your kit has an illustration of where to drill then you can put it on the door and then draw a pencil around it. If your door has moulding or a sill at the bottom, make sure that you leave enough space between your cat and the moulding or sill.

Set a square to ensure that you are cutting correctly and to ensure the hole is in a rectangle shape. Once you are satisfied with this, you can begin to remove the remaining door material. If you own a square that you have cut, [empty] make use of it to verify whether you're cutting in the right way and to make sure the hole is in a rectangle shape, once you are happy with this you can begin to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet inside and out without worrying about unwanted visitors or unwanted gifts. It also prevents draughts, and helps to keep your home's temperature in check. However, fitting an animal flap on your door might seem like an overwhelming task for those who haven't done it before. This can lead many to hire a professional joiner or carpenter to complete the task. While this is certainly an option, it's possible to do the job yourself if you have the appropriate tools and follow the instructions with care.

This is much simpler to accomplish on a wooden door, but it is still possible using uPVC. However it is important to be cautious not to scratch the doors since this could make it impossible to claim your warranty. The first step is to measure the door and ensure that it is able to be able to accommodate the new cat flap. If you have a standard uPVC panel it's easy. However in the case of composite or another type of door, you might require more care.

Next, you will need to determine the belly height of your cat. This is the distance from the floor to the bottom of the cat flap bifold doors's stomach, and you will need to find a spot near the door where this measurement will fall within the range your cat is able to comfortably walk through. Once you know this then you need to mark out the area with pencil and a spirit level so that you can ensure that the hole you make will be suitable for your cat.

After you've marked the area, it's now time to cut the hole. It is crucial to be patient and use a jigsaw ensure that the cuts are smooth and clean not uneven and rough. This could cause damage to your door. It is also important to wear safety glasses and a dust-proof mask when using the jigsaw, since breathing in the dust can be dangerous to your health. Once you have completed the cutting, you will have to smooth the edges of the hole using sandpaper so that your cat flap can be fitted easily in place.

Make a hole

It can be difficult to put the cat flap onto a door panel or sealed double glazing unit. It is tempting to tackle the task yourself, but unless have plenty of expertise in DIY, it's likely to be best to have a professional to do the task for you. A botched job could not only be unsightly, but also pose an security risk. It could let cold air in when the cat is outdoors and hot air to escape when inside.

The hole's location should be marked on the door using a pencil and spirit level. This will ensure that it is properly positioned and aligns with the rest of the door. Make sure you have some sandpaper on hand to smooth any rough edges.

After the line is marked you should cut out the hole using the jigsaw. Remember to wear any necessary safety gear for working with an electric tool. If you're worried about noise, you can get an electric jigsaw that is more quiet and easy to use.

It is essential to only cut away the material required to make the cat flap. A little bit of extra material will be required for the thickness of the the flap but cutting off more than this can cause problems or cause damage to the door frame.

A door made of upvc may include a metal frame, or panel that will interfere with the microchip cat flap, and in this case you'll need to cut an over-sized hole to ensure that the metal does not touch the wall of the cat flap, if this is the case, it is essential to fill in the gap and make it watertight.

If you are fitting a cat flap into an upvc door or a double-glazed window with a metal frame, you'll need to talk to a professional who will provide you with a new glass pane with the hole for the cat flap premade in it. This will be less expensive than trying to fit a cat flap inside an existing pane that was not designed for this purpose.

Place the Flap

Cat flaps let your pet come and go as they please, giving them the ability to unwind inside the house whenever they're feeling like it. However, if you have an uPVC door, it may be difficult to put in a Cat flap in Upvc door panel flap, particularly in the absence of glass panes that could be cut to fit one. Luckily, if you're happy to buy and install a replacement half-glazed uPVC panel, then it's possible to install a cat flap to these doors. It's not as simple as simply making a hole in the door, however there are a few things you'll need to do first to ensure it's safe.

A upvc cat flap door panels, GRP or composite door panel is typically made up of an flimsy plastic outer layer joined to a soft polystyrene core that is insulating. The material is fairly fragile and care should be taken when cutting into it to avoid causing damage. This type of door typically includes a template that you can use as a reference to cut the hole in your door.

Once you've determined the position of the hole in your door, now it's time to put in the cat flap itself. You can purchase and install a wide variety of different models including basic button operated ones to ones that are activated by microchips that only let in your pet. However, regardless of what type of cat flap you select, it is essential to ensure that your cat can use the flap without becoming stuck outside in the rain.

A circular fitting is more effective than a square because circles can be cut more securely into glass. This is because square holes make the glass more susceptible to cracking when drills are used on it. It's also a much safer option to use as you don't risk having to drill into toughened glass that may break and injure your pet or your family. This is especially crucial if you have children or elderly people in your home that could be injured by glass shattering.