• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back door with cat flap fitted at their own pace, without having to let them in or out. They also can help to prevent your cat from toileting inside the house.

Fitting a cat flaps for french doors flap in a upvc door panel is a lot easier than a glass door, however it does require some skills and the appropriate tools.

Take a measurement of the door

Fitting a cat flap installation in glass doors near me flap in the door isn't easy but as long as you select the right kind of cat flap fitting flap be patient and Fitting a cat flap follow the steps provided it should not prove to be too difficult. We will show you how to mark out the shape, using an jigsaw for cutting out the door's opening and then complete the job by securing the cat flap to the door. This will ensure that the flap is in place and protects the doors from damage caused by wind and rain.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will ensure that the flap is large enough that your pet can go inside and out of the house without having to open or close the door each time, but also small enough to prevent them from going too far in either direction.

If your kit comes with an illustration of where to drill then you can put it on the door and then use a pencil around it. If your door has a sill or moulding along the bottom of it ensure that you have clearance from these to ensure your cat's safety and will prevent them from getting access to your home.

Then put on your eye protection and a dust mask and using a jigsaw, begin to cut along the line that you've drawn in, don't try to push the blade too hard as this can cause it to cut more quickly than you want it to. If you own a set square then use it to check that you are cutting correctly and to ensure that the hole is a good rectangle shape, once you are happy with this you can begin to take off the remaining door material.

Draw a Line

The cat flap allows you to let your pet in and outside without having to worry about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature inside your home stable. Fitting a cat flap to your door can be a daunting task for those who haven't attempted it before. Many people will call a professional joiner or carpenter to do the job. This is an option but you can do it yourself if the tools are appropriate and the instructions are followed.

While this is far simpler to accomplish with a timber door, it is still feasible in uPVC doors, though you must be cautious not to damage the doors as this will cause damage to your warranty. The first step in the process is to take measurements of the door, making sure that it is able to accommodate the new cat flap. If you have an ordinary uPVC panel, this should be easy. However when your door is composite or a different type of door, you may need to be more careful.

Next, you will need to determine the height of your belly for your cat. This is the measurement from the floor to the lower part of the cat's stomach and you'll need find a place on the door where this measurement is within the range that your pet can comfortably go through. Once you've got the information, you'll be required to mark the space with a spirit level and a pencil so you know the hole will fit your cat.

After you have marked the area, it's time to cut out the hole. You will require a jigsaw and it is crucial to take your time in order to ensure that the cuts are smooth and straight, rather than uneven and rough, as this could damage your door. Wear safety glasses and a dust mask when using the Jigsaw. Inhaling sawdust is dangerous for your health. After you've finished the cutting, you'll have to smooth the edges of the hole with sandpaper so that your cat flap will fit easily.

Make a hole

The process of fitting a cat flap (please click the next page) to an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to tackle the job yourself, but unless have experience with DIY, it's probably best to get an expert to complete the task for you. A botched job may not only look ugly, but it could also be an issue for security and also allow cold air to enter when the cat is outside and hot air to escape when inside.

Mark the hole's position on the door with an eraser and a spirit level. This will ensure it is properly positioned and runs flush with the rest of the door. You should make sure you have some sandpaper on ready to smooth any edges.

Wear any safety gear you'll need to use a power tool. If you're worried about noise, you can get a jigsaw with a cord that is quieter and easier.

You should only remove the material needed to fit the cat flap. It is essential to leave some extra material for the wall thickness of the flap. However cutting away too much could cause problems or even damage the door frame.

A door made of upvc door panel cat flap may contain a metal frame or panel that could interfere with the microchip cat flap if this is the case you'll need to make an oversize hole to ensure the metal doesn't touch the wall of the cat flap, if this is the case, it is important to fill in the gap and make it watertight.

If you are fitting an animal flap to the frame of a double glazed windows with a metal frame, you'll need to talk to a professional who can provide you with a new pane of glass with the hole for the cat flap already drilled inside. It will be much cheaper to have this done instead of trying to install a cat flap into an existing glass pane that hasn't been designed specifically for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to go and come whenever they like and let them relax in the home whenever they like. If you have a uPVC front door, it might be hard to install a cat flap. This is especially the case when you don't have an glass panel which can be cut. Luckily, if you're happy to buy and install a replacement half-glazed uPVC panel, it's possible to fit a cat flap to these doors. It's not a simple matter of cutting an opening in the door. You'll also need to take a few steps to ensure that it is secure.

A composite, uPVC, or GRP door panel is typically comprised of a plastic skin that is attached to an insulating polystyrene core. The material is fairly fragile and care should be taken when cutting into it to avoid damaging. This type of door typically has a template which you can use as a reference to cut the hole into the door.

Once you've determined the position of the hole in your door, it's time to put in the cat flap itself. You can purchase and install a wide variety of different models, from basic push-button operated ones to ones that are activated by microchips that allow only your pet. Whatever type of cat flaps you choose it's essential that your cat is able to use the flap comfortably without getting stuck outside in bad weather.

It's a good idea choose circular fittings instead of one that is square, because circles can be more securely cut into door glass. This is because square holes make glass more vulnerable to cracking when a drill is used on it. This is also a safer option since you don't have to drill into the toughened glass which could break and hurt your pet or family members. This is especially important if you have a child or an elderly person living in your home who may be injured by shards of glass.